STIPE Official Forum
STIPE Servers and Support => Minecraft => Topic started by: sirjorge on 18 May 2026, 14:11:23
-
How to Install Bedrock Add-ons using the STIPE Control Panel
STIPE provides a built-in Bedrock Addons Manager that allows you to upload, install, remove and organise Minecraft Bedrock add-ons directly from your control panel.
You can upload standard Bedrock .mcaddon and .mcpack files without needing to use FTP or the File Manager.
Quick Summary
- Stop your Bedrock server.
- Download the required .mcaddon or .mcpack files.
- Upload them using Drag & Drop or Browse Files.
- Upload both Behavior and Resource Packs when the creator provides both.
- Check that the add-on shows as installed.
- Adjust the load order if required.
- Click Save Load Order.
- Start the server and test the add-on.
1. Before you begin
For the easiest installation, we recommend stopping your Minecraft Bedrock server before uploading the add-on.
If your server is stopped when the file is uploaded, STIPE will automatically attempt to install the add-on for you.
If your server is currently running, you can still upload the file. After uploading:
- Stop the server
- Return to the Bedrock Addons Manager
- Click Install next to the uploaded add-on
2. Finding Bedrock add-ons
The Bedrock Addons Manager supports downloadable add-ons supplied as:
Some websites that provide downloadable Bedrock add-ons include:
CurseForge Bedrock Add-ons (https://www.curseforge.com/minecraft-bedrock/search?class=addons&page=1&pageSize=20)
MCPEDL (https://mcpedl.com/category/mods/addons/page/1/)
ModBay (https://modbay.org/mods/)
Important:
These are third-party websites and are not affiliated with or operated by STIPE. STIPE does not control the files or content hosted on these websites.
Please take care when downloading files and only download content from sources you trust.
3. Marketplace add-ons
Minecraft Marketplace purchases are different from normal downloadable Bedrock add-ons.
Marketplace content is licensed and managed through Minecraft and will not normally provide a standalone .mcaddon or .mcpack file that can be uploaded to a Bedrock Dedicated Server.
The STIPE uploader is intended for downloadable Bedrock add-ons where the creator provides the actual .mcaddon or .mcpack files.
4. Open the Bedrock Addons Manager
From your STIPE control panel:
- Select your Minecraft Bedrock server.
- Open the server settings.
- Navigate to the Bedrock Addons Manager.
You will see an upload area similar to:
Drag & drop Bedrock add-ons here
You can either:
- Drag a .mcaddon or .mcpack file from your computer into the upload box, or
- Click Browse Files and select the file from your computer.
The maximum supported upload size is currently 512 MB per file.
5. Behavior Packs and Resource Packs
Important:
Some Bedrock add-ons contain both:
- A Behavior Pack
- A Resource Pack
Sometimes these are bundled together inside one .mcaddon file.
Other add-ons provide them as two separate files.
If the creator provides separate Behavior Pack and Resource Pack files, make sure you upload both.
The add-on may not work correctly if only one of the required packs is installed.
For example, you may receive:
MyAddon\_Behavior.mcpack
MyAddon\_Resources.mcpack
In this situation, upload both files.
6. Installing an uploaded add-on
After uploading, the add-on will appear in the Bedrock Addons Manager.
If the server was stopped during the upload, STIPE will automatically attempt to install the add-on.
If the server was running, the file will be uploaded but will not be activated automatically.
To install it:
- Stop your Minecraft server.
- Open the Bedrock Addons Manager again.
- Find the uploaded add-on.
- Click Install.
Once installed, the status shown beside the add-on will change accordingly.
7. Changing add-on load order
Some Bedrock add-ons need to load before or after other packs.
The Bedrock Addons Manager allows you to change the load order directly from the control panel.
Change the order number beside each add-on and then click:
Save Load Order
The lowest numbers are loaded earlier in the list.
You may also see information such as:
B:1
R:2
B refers to the Behavior Pack position.
R refers to the Resource Pack position.
These can differ because Bedrock maintains separate Behavior Pack and Resource Pack lists.
After changing the order, click Save Load Order before starting your server.
8. Removing an uploaded add-on file
If you uploaded the wrong file and the add-on has not been installed, you can remove it using the Delete button.
For safety, the Delete option is only available for packs that are not currently installed.
If an add-on is already installed, uninstall or remove it appropriately before deleting its source file.
9. Start your server
Once the required add-ons have been installed and the load order has been saved:
- Start your Minecraft Bedrock server.
- Wait for the server to fully load.
- Connect to the server and test the add-on.
Some add-ons may require additional configuration or specific Minecraft versions. Always read the installation instructions supplied by the add-on creator.
Troubleshooting
The add-on uploads but does not work
Check whether the creator supplied both a Behavior Pack and Resource Pack. If they did, make sure both files have been uploaded and installed.
There is an Install button beside the file
This normally means the file has been uploaded but has not yet been activated. Stop the server and click Install.
The add-on was purchased from the Minecraft Marketplace
Marketplace content generally cannot be uploaded using this system unless the creator separately provides a standard .mcaddon or .mcpack version intended for dedicated servers.
The add-on requires a particular Minecraft version
Check the creator's download page and make sure the add-on supports the version of Minecraft Bedrock currently installed on your server.
The add-on still does not work
Check the creator's documentation first. If you are still having trouble, please contact STIPE Support and let us know the name of the add-on and where you downloaded it from.